Product

Decade Box, Capacitance, 5, 100pF to 11.111µF, 5 %

72-7265

-

Tenma

72-7265 - Tenma

Ideal for service, prototype and experimental use, this useful tool may be set at any non-polarized capacitor value from 100pF~11,111F, in 100pF increments.

Product

PLC Fiber Optic Splitter, ABS Box Package, 2.0mm, SC/APC Connector

SUN-PLC 1x2

-

Guilin GLsun Science and Tech Group Co., LTD

SUN-PLC 1x2 - Guilin GLsun Science and Tech Group Co., LTD

Configuration Type 1x2 Wavelength 1260~1650 nmInsertion Loss 4.1 dB Return Loss 60 dBDirectivity 55 dB PDL 0.2 dBDimension 100*80*10 mm Operating Temperature -20℃ to +70℃

Product

Decade Box, Calibrated W/D & U, Capacitance, 5, 100pF to 11111µF, 5 %

72-7265 CAL DU

-

Tenma

72-7265 CAL DU - Tenma

The 72-7265 CAL DU from Tenma is a capacitance decade box. It is ideal for service, prototype and experimental use. This useful tool may be set at any non polarized capacitor value from 100pF to 11,111µF in 100pF increments. The decade accuracy is ±5% capacitors used throughout at <1μF, 1KHz test frequency, ≥1μF, 100Hz test frequency. It has weight of 304g/0.69lb and dimension is 14.7cm × 11.7cm × 5.5cm (5.79" × 4.61" × 2.16"). It is typically used in general applications, troubleshooting, maintenance, education and vocational training, production line testing, radio and TV services, working standards, research design & develop, physics laboratory work.

Product

Decade Box, Calibrated, Resistance, 7, 1ohm to 11.11111Mohm, 1 %

72-7270 CAL

-

Tenma

72-7270 CAL - Tenma

The 72-7270 CAL from Tenma is a resistance decade box. It is ideal for service, prototype and experimental use. This useful tool may be set resistance value from 1 to 11,111,110 ohm in one ohm increments. The decade accuracy is ±1% resistors used throughout. It has weight of 320g/0.70lb and dimension 14.7cm × 11.7cm × 5.5cm (5.79" × 4.61" × 2.16"). It is typically used in general applications, troubleshooting, maintenance, education and vocational training, production line testing, radio and TV services, working standards, research design & develop, physics laboratory work.

Product

Small Test Boxes

-

Cuming-Lehman Chambers

Cuming-Lehman Chambers

In today’s environment a small specific test box may be needed to test a component, perform R&D or simply tweak your product. Cuming Lehman Chambers has the ability to custom design and construct a precise test box to meet your specific needs.

Product

Expandable Embedded Box IPC With Intel® Celeron® J1900

UNO-3272G

-

Advantech Co. Ltd.

UNO-3272G - Advantech Co. Ltd.

Intel® Celeron® J1900 2.0GHz processor with 4GB DDR3L memory3 x USB2.0, 1 x USB3.0, 2 x RS232/422/485, 2 x RS2322 x 10/100/1000BASE-T EthernetVGA, HDMI support 2 x independent displaysOptional Digital I/O support for sensing and controllingDedicated TPM2.0 microcontroller designed for hardware securityFlexible system I/O expansion by iDOOR technologySupport diverse fieldbus protocol by iDOOR technologyDual Power input for power redundancy

Product

Decade Capacitance Box

TEK905

-

Martindale Electric Co. Ltd

TEK905 - Martindale Electric Co. Ltd

The TEK905 is a 5 decade capacitance box giving a useful range of capacitance values.

Product

IEC60529 IPX1/2 Vertically Drip Box

CX-IPX1/2

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-IPX1/2 - Shenzhen Chuangxin Instruments Co., Ltd.

IEC60529 IPX1/2 Vertically Drip Box

Product

Decade Box, Resistance, 7, 1ohm to 11.11111Mohm, 1 %

72-7270

-

Tenma

72-7270 - Tenma

Pocket sized resistance decade box ideal for service, prototype and experimental use.*Seven decades of resistance*28 individual slide switches*Terminals with multi way binding posts*Rugged components with ABS plastic housing case*12-month limited warranty *view Terms & Conditions for details

Product

GPIB Controlled Signal Routing Box

GPIB

-

Test Electronics

GPIB - Test Electronics

Test Electronics will customize the TE3000 GPIB signal routing box for your test application. Then, you simply rack and stack all the equipment, cable all the switched signals to the back of this GPIB box, add a rack mount computer, plug in the National Instruments GPIB board and software. Then run your customized GPIB based test system.

Product

Compact In-Vehicle Computing Box For Fleet Management

TREK-570

-

Advantech Co. Ltd.

TREK-570 - Advantech Co. Ltd.

Equipped with DeviceOn/iService software for remote device management, Can be paired with TREK-303/306 in-vehicle smart display via a single-cable connection. Supports real-time rear view monitoring, Dual independent display/audio output for both driver and passenger for IVI and digital signage application.

Product

Switch Box for CT Analyzer

CT SB2

-

OMICRON electronics

CT SB2 - OMICRON electronics

The CT SB2 switch box is an accessory for the CT Analyzer which allows automatic testing of multi-ratio current transformers. It is connected to all taps of the current transformer and to the CT Analyzer.

Product

Amplifier, Switch and Test Box

CLIOQC Model V

-

Audiomatica

CLIOQC Model V - Audiomatica

The QCBOX Model 5 is a non-conventional unit designed to fulfil actual and future needs of an electro-acoustical analyzer like the CLIO system. It is USB linked to a PC and can be configured, with dedicated software controls, to assist frequency response and impedance measurements or to perform DC measurements. Using it for frequency response measurements acts as 50W power amplifier to drive the speaker or network under test while routing one-of-four inputs to the analyzer as well the current sensing output. The four inputs are able to provide a phantom power supply both for Audiomatica or general purpose microphones (0-24 V range, software controlled). Impedance measurements can be done either switching the D.U.T.’s load across the analyzer’s input or using a dedicated output, ISENSE, thus allowing impedance measurements in constant voltage mode as well voice coil current distortion analysis. An internal ADC measures the DC current into the voice coil. Thanks to an internal software controlled voltage generator the speaker can be driven with a superimposed DC voltage (±20V), allowing for measurements of large signal parameters. Two ADC converters with a ±2.5 V and ±5 V are available at inputs 3 and 4 to measure the displacement with a laser sensor or any other DC signal. A dedicated digital input handles an external foot pedal switch (or TTL signal) to be connected and triggers QC operations. A 6 bit output – 5 bit input TTL digital port is available to interface the QCBOX and driving software with external hardware (like turntables for example).The QCBOX Model 5 finds use both in laboratory for R&D applications and in production lines setups.

Product

Programmable Capacitance Decade Box

PCS Series

-

IET Labs

PCS Series - IET Labs

A broad range of laboratory grade programmable capacitance decade boxes for applications requiring a programmable impedance unit controlled manually and by a computer via an IEEE-488, RS-232 interface.

Product

Launch Fiber Box

-

Diamond SA

Diamond SA

OTDR measuring devices are used in various ways in fibre optic technology. They enable extensive characterisation of existing fibre optic cabling networks. The use of launch and receive fibres is advantageous when it comes to ensuring precise results evaluations. With bidirectional backscatter measurements with launch and receive fibres, the attenuation values of the first and last plug-in connection can be determined precisely by averaging and device dead zones can be avoided. Measuring device manufacturers recommend different lengths of launch and receives fibres to avoid “phantom reflections”. These launch and receive fibres are also subject to measuring equipment monitoring and should regularly undergo revision in accordance with the OTDR measuring devices. A good measurement result depends on the state and quality of the measuring equipment used. Diamond offers various types of launch and receive fibres, one with standard telecommunications connectors and the other with an outdoor connector for harsh environments.

Product

TEST BOX

6280 TB

-

Standard Electric Works Co., Ltd

6280 TB - Standard Electric Works Co., Ltd

● Wide range of operating voltage from AC 210V/50Hz to 250V/50Hz.● For checking AC voltage.● For checking a RCD tester's test current & time in mA(ms).● For checking a loop tester.● For wiring check (Phase, Neutral, Earth).● For checking continuity.● For checking insulation (The maximum is 1.2kV).● For checking UK16th edition.● Safety standard: EN 61010-1 / EN 61326-1

Product

Decade Boxes

L C R

-

PGP Electronics Private Limited

L C R - PGP Electronics Private Limited

PGP Electronics offers wide range of decade boxes for Inductance, Capacitance and Resistance. These decade boxes offer you a greater flexibility in attaining the required component value and are designed to withstand rugged operation.