Product

Optical Fiber 1×13 Switch

OFSW - 1 × 13

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 13 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×13 is a 1×13 prism optical switch. It can support 1 optical fibers input and 13 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Optical Fiber Identifier

AFI-500

-

Shanghai Fibretool Technology Co.,Ltd.

AFI-500 - Shanghai Fibretool Technology Co.,Ltd.

AFI-500 Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without any damages to the bended fiber. When the traffice is present,the intermittently audible tone is activated.

Product

Optical Fiber Identifier

-

Anfkom International Co.,Limited

Anfkom International Co.,Limited

It is an essential installation and maintenance instrument.By inserting the fiber into its adapter head,it can identify SM optical fibers without any damage by detecting the optical signals being transmitted through them so as to avoid the opening of the fiber at the splice point for identification and thus avoids the interruption of the service.In the presence of traffic, the intermittently audible tone is activated.The 3306A optical fiber identifier also allows relative core power display and identification of the 270Hz,1kHz and 2kHz frequencies. When they are used to detect the frequency, the continuously audible tone is activated.There are four types of adapter heads available: 0.25,0.9,3.0 and 2.0.The 3306A optical fiber identifier is powered by a 9V alkaline battery.

Product

Optical Fiber Identifier

AFI-400

-

Shanghai Fibretool Technology Co.,Ltd.

AFI-400 - Shanghai Fibretool Technology Co.,Ltd.

AFI-400 Optical Fiber Identifier is an important tool for optical maintenance, which is used for nondestructive fiber identification work, can be detect in any location of both SM and MM fiber. Meanwhile it also has Visual Fault Locator module with fault location function. It is the ideal instrument for online test.

Product

Dispersion Compensation Optical Fiber Module

DCM-G.655-C-Fxx

-

Hangzhou Huatai Optic Tech. Co., Ltd.

DCM-G.655-C-Fxx - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai DCM-G.655-C-Fxx dispersion compensation fiber module is designed for single mode optical fiber G.655 C band, dispersion and dispersion slope compensation for wide band, the system optimized residual dispersion. The PCVD module based on optical fiber technology is mature and reliable, can improve the performance of optical transmission system.

Product

Omnisens Optical Fiber And Cable Measurement And Quality Control

https://www.omnisens.com/uploads/1/2/0/5/120592129/telecom-1_orig.png

-

Omnisens

https://www.omnisens.com/uploads/1/2/0/5/120592129/telecom-1_orig.png - Omnisens

To provide quality control or help with the design and testing of fibers, Omnisens Vision offers fast, accurate strain and temperature measurements.Omnisens Vision is based on Brillouin scattering. In single mode fibers it produces precision readings with high spatial resolution over long distances and/or large loss test conditions. It is capable of high speed testing in dynamic situations such as flex fatigue.Its configuration flexibility makes the Omnisens Vision well adapted to a wide variety of test & measurement needs.

Product

Yamasaki Optical Fiber Identifier

TF916

-

Yamasaki Optical Technology

TF916 - Yamasaki Optical Technology

The Yamasaki TF916 Optical Fiber Identifier is an essential part of any professional fiber optic toolkit. By inserting fiber into the Yamasaki TF916 Optical Fiber Identifier head, the Yamasaki TF916 Optical Fiber Identifier can be used to identify traffic, traffic direction, frequency and optical power within any singlemode optical fiber. The sleek black outer housing is comprised of an anodized aluminum to make it lightweight and tough. Also included with the Yamasaki TF916 Optical Fiber Identifier are four adaptor heads that are specifically designed to suit various optical fiber types with minimal bend loss. The easy to read ultra-bright LED display and audible tone make operation easier and can save you valuable time in the field.

Product

OTDR

OT700 series

-

Shanghai Tarluz Telecom Tech Co., LTD

OT700 series - Shanghai Tarluz Telecom Tech Co., LTD

SM OTDR, MM OTDR, visual fault locato), PON online test, Optical Power Meter, Optical Laser Source, Fiber Microscope, Ready for all kinds of environment.

Product

CCTV Security Testers

-

Fiberinthebox

Fiberinthebox

CCTV Security Tester is a kind of multi-function test tool for CCTV and security camera installation professionals. CCTV Camera Tester is developed aiming to CCTV security system installation and maintenance, combining the following function: Optical Fiber Communication test, low power circuit test, video test and PTZ control, and DC12 1A output for camera test, etc. Helps solving varies problem of security system. It could be also used in laboratory tests, equipment maintenance, etc. CCTV Tester is really an ideal multi-function instrument for CCTV Security System, Optical Fiberal Communication, CATV and other optical fiber networks.

Product

Optical Fiber 1×2 Switch

OFSW - 1 × 2

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 2 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×2 is a 1×2 prism optical switch. It can support 1 optical fibers input and 2 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Optical Fiber 32×1 Switch

OFSW - 32 × 1

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 32 × 1 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 32×1 is a 32×1 prism optical switch. It can support 32 optical fibers input and 1 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Mini Fiber Optical Monitoring Alarm System

Mini FOMA

-

Radiantech, Inc.

Mini FOMA - Radiantech, Inc.

Mini FOMA (Fiber Optical Monitoring Alarm System) is integrated RTU (Remote Test Unit) 、Center Monitoring Server and its management software to achieve integrated operation、remote management、unattended monitor、periodic fiber scan、predictive analysis and support the instant fiber with status information and alarm warning, accurate of long-term fiber data record.

Product

Test of Optical Fibers

-

adaptronic Prüftechnik GmbH

adaptronic Prüftechnik GmbH

Test of optical fibers.

Product

Optical Fiber 1×8 Switch

OFSW - 1 × 8

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 8 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×8 is a 1×8 prism optical switch. It can support 1 optical fibers input and 8 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Customizable EFP/ENG Signal Transport

BullDog Mini Series

-

Multidyne

BullDog Mini Series - Multidyne

An Ideal Solution For Small Remote Broadcast Productions The BullDog Mini is a compact, rugged field fiber transport device designed from the ground up to meet the needs of single camera and booth kit setups. The BullDog Mini can transport bidirectional 3G-SDI, IFB, and two MIC/line audios as well as, two serial data channels – all over a single strand of single-mode fiber. Optical connector options include SMPTE, opticalCon, or standard ST. With options for remote power via SMPTE hybrid fiber cable and battery operation, the BullDog Mini is ready for any location regardless of available power.

Product

C-Band ASE Light Source

ASE5000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

ASE5000 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai ASE5000 series is C-Band ASE light source with featured with high stability and high output. It is mainly applied for testing of C-Band optical components and optical communication equipments as well as Fiber Optical Sensor etc. Huatai ASE5000 has three types of exterior structure, suitable for different customer’ requirements.

Product

Fiber Tranceivers

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

Active Optical Cables, Fiber Optic Transceiver Module is a self-contained component that can both transmit and receive. Usually, it is inserted in devices such as routers or network interface cards which provide one or more transceiver module slot (e.g GBIC, SFP, XFP).

Product

Optical Fiber 1×16 Switch

OFSW - 1 × 16

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 16 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×16 is a 1×16 prism optical switch. It can support 1 optical fibers input and 16 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

COM Express Type 7 Starter Kit

COMe Type 7 Ice Lake-D STKit

-

ADLINK Technology Inc.

COMe Type 7 Ice Lake-D STKit - ADLINK Technology Inc.

The Type 7 Starter Kit Plus consists of a COM Express Type 7 module with ATX size Type 7 reference carrier board that offers one PCI Express x16 slot with proprietary pinout for 10GbE adapter card that convert 10GBase-KR to 10GbE Optical Fiber or 10GbE Copper signal, one PCI Express x16 slot, two PCI Express x8 slots, Serial ATA, USB3.0/2.0, Gigabit LAN and Super I/O. in addition, a IPMI BMC (miniBMC) located on carrier board connect to COM Express Type7 module by NC-SI interface to support some of out-of-band management features. All necessary cables are included.

Product

LED Analyser

Feasa

-

Intrinsic Quality,Inc

Feasa - Intrinsic Quality,Inc

Each LED Analyser allows for simultaneous measurement of up to 20 different light sources as it measures Color and Intensity – Brightness Test. Light from the LEDs is transferred by Plastic Optical Fibers and transported to the LED Analyser board for accurate measurement and analysis. The Feasa Analyser has been engineered to test LED’s and other lighting devices such as LCD Displays automatically. Intrinsic Quality offers a LED tester demo unit that can be tried out for two weeks free of charge. Currently available for purchase, call to order:

Product

Optical Fiber Converters

-

Fiberinthebox

Fiberinthebox

Optical Fiber Transmission products play an important role in systems for wide-band analog signals and digital signals with high data rates. They send and receive data from point-to-point via a network, thus the fundamental function of all fiber systems from small to large. A lot of optical fiber transmission products are available from Fiberinthebox, such as Optical Fiber Transceivers, Fiber Media & Protocol Converters, Optical Multiplexers, Fiber optic modems, Optical Switches, Network Interface Cards, and PON & AON. Our optical fiber transmission products are developed and manufactured to provide reliable, durable performance.

Product

MPO IL/RL Testers

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

SunmaFiber also supply MPO Tester from Yokogawa, Agilent(Keysight), Optical Talk Set, fiber splitter PDL Loss tester, MTP Tester, fiber Return Loss & Insert Loss tester and other MTP/MPO testing solutions, you can find the most effective products in a reasonable price. Welcome to SunmaFiber. Contact us at Sales@SunmaFiber.com or Live Chat with us. Buy other fiber optic products on SunmaFiber. Save your money & time right now!

Product

Optical Fibers Communications

-

ETEK TECHNOLOGY CO., LTD

ETEK TECHNOLOGY CO., LTD

1. Textbook includes the theoretical and practical details.2. Textbook includes the expected results for reference.3. Problem discussion attached together with answers for instructor.4. Only need oscilloscope and spectrum analyzer to obtain the measured results.