Industry Pack Carrier
-
Product
Quad M Module Carrier
DP-cPCI-5112
-
DP-cPCI-5112 provides a compact high performance cPCI bus gateway to four ANSI approved M-Module Interfaces. This is a non-intelligent 6U form factor M-Module Carrier board. The DP-cPCI-5112 allows a flexible I/O solutions to be implemented in the carrier board. The M-Module carrier board occupies single slot in a CompactPCI system. Different mix and match of various I/O solutions will simplify the job for system integrators.
-
Product
Industrial Fanless Mini PC (Dual 4K Media Player)
EMP-100 Series
Box PC
- Palm size and slim design (H: 28mm)- Intel® Celeron® N6210/J6412 processor- Support 2x HDMI output- Support 12V DC input- 1 x DDR4 SO-DIMM, up to 16GB- 1 x M.2 2280 Key M for optional storage device- 1 x M.2 2230 Key E for optional Wi-Fi/BT Module- 3 x USB 3.2 Gen.1 (Type-A)
-
Product
Industrial Ethernet Physical Layer Devices
-
The ADI Chronous™ Industrial Ethernet physical layer (PHYs) portfolio includes solutions for standard 10 Mbps, 100 Mbps, and 1 Gbps. It also features the new 10BASE-T1L technology for single-pair Ethernet.Our industry-leading low latency and low power PHY technology maximizes data transmission and signal integrity in deterministic applications by reducing cycle times and system power consumption. It enables superior synchronization of signals across the industrial network and supports the development of TSN.
-
Product
Industrial Safety VOM
260-9
-
The new 260 Volt-Ohm-Meter is suitable for testing most commercial and industrial installations and is rated for Category III-600V applications. Safety is the major design feature of the 260-9S/9SP and the reputation, advantages and reliability of Simpson test equipment is guaranteed.
-
Product
Intelligent Double Sized H009 Interface Module for Excalibur 8000 Family of Carrier Boards
M8KH009
Interface Module
The M8KH009 is an intelligent, double-sized, H009 interface module for the multimode, multiprotocol, EXC-8000 family of carrier boards. The M8KH009 provides a complete solution for developing and testing H009 interfaces and performing system simulation of the H009 bus, according to the standard H009 protocol. Each module of the M8KH009 contains 32K x 16 dualport RAM for Data Blocks, control registers, and Look-up tables. In addition, the module contains another 32K x 16 dual-port RAM for a Concurrent Monitor. All data blocks and control registers are memory mapped, and may be accessed in real-time. Each of the independent, dual-redundant M8KH009 modules may be programmed to operate in one of three modes of operation: Central Control Complex (CCC) mode with Concurrent Peripheral Unit operation (1–16 PUs), Peripheral Unit mode (Multiple – up to 16 PUs) and Bus Monitor mode. In addition, the module can simultaneously operate as an independent Internal Concurrent Monitor in CCC, Multiple PU or CCC/Concurrent PU modes.
-
Product
Industrial Touch Monitor IDP31 Bezeless Series
-
IDP31 ProFlat bezeless industrial touch monitor series comes with a 100% flat front glass for easy maintenance and are equipped with a projected capacitive touch screen which supports up to 10 points.
-
Product
MTCA.3 Conduction Cooled MicroTCA Carrier Hub (MCH)
UTC041
-
The VadaTech UTC041 is the most feature-rich conduction cooled MicroTCA Carrier Hub (MCH) on the market. Its management software is based on VadaTech’s robust Carrier Manager and Shelf Manager which have been deployed for years with proven results. The MCMC manages the Power Modules, Cooling Units, and up to 12 AMCs within the chassis. It also manages PCIe Gen3 or 10GbE XAUI fabric switch as well as the standard GbE with 10GbE uplink Base Channel switch.
-
Product
MicroATX Server Board With Intel® Core™ Ultra 9/7/5, DDR5, And PCIe Gen5 For Edge Computing, Industrial Automation, And Compact Servers.
ASMB-589
-
Powered by LGA 1851 Intel® Core™ Ultra 9/7/5 processors with W880 chipset for high-performance computing.Supports up to 192 GB of DDR5 ECC/Non-ECC UDIMM memory at speeds of 5600/4800/4400 MT/s for demanding applications.Features two PCIe x16 (Gen5) and two PCIe x8 (Gen4) slots for flexible expansion with high-speed peripherals.Offers versatile display connectivity with DisplayPort, VGA, and HDMI 2.0 ports, supporting triple simultaneous displays.Provides extensive storage options with five SATA 3 ports and eight high-speed USB 3.2 ports for peripheral connectivity.Includes one M.2 2280 slot (PCIe x4) for fast NVMe SSD storage, enhancing system boot and application load times.Designed with rackmount-optimized placement and positive airflow for enhanced thermal performance in server environments.Ensures reliable operation in industrial environments with an ambient operating temperature range of 0 ~ 60°C (32 ~ 140°F).
-
Product
Industrial Inline Process Refractometer – 2″ Tri-Clamp Fitting
VIP2
-
The MISCO VIP2 (“Very Important Process”) inline process refractometer showcases the latest advancements in smart-sensor technology. Housing the intelligence for processing and communication in the sensor itself, the VIP2 refractometer eliminates the need for an external control box. The stainless steel sensor head and sapphire measuring surface are designed to survive the toughest environments. The sensor mounts to your processes using an industry standard 2” Tri-Clamp fitting.
-
Product
Mounting Ear Kit, VTI Instruments, SMP1200 Carrier
510109354
Mounting Kit
Mounting Ear Kit, VTI Instruments, SMP1200 Carrier, (for use with part #510109118)
-
Product
ProSys-5101, Industrial Embedded Computing Platform
063-501
-
ProSys-5101 is a compact application ready platform with a low power CPU for various industrial uses, as process control, security, digital signage, IoT edge points and more. The large amount of I/Os enables connectivity for most applications.
-
Product
Industrial Serial GSM Modem
ENVIROMUX-GSM-IND
-
Sends SMS messages to a pager or cell phone when a sensor goes out of range of a configurable threshold. SIM card supporting SMS messaging required (not included). Ideal for harsh environments and high temperatures up to 149°F (65°C). GSM/GPRS/EDGE 850/900/1800/1900 MHz. AT command compatible. Dimensions: 3.58x2.28x0.87 in (91x58x22 mm). Operating temperature: -13 to 149°F (-25 to 65°C). Operating humidity: up to 95% non-condensing RH. Regulatory approvals: CE, C-Tick. Compatible with ENVIROMUX-SEMS-16(U).
-
Product
ULI-224TE - Heavy Industrial RS-232 (DB9 Female To RS-422/485 (Terminal Block) Converter. Panel Mount Metal Chassis
BB-485DRCI-PH
-
Converts RS-232 data signals to RS-422/RS-485Three-way 2 KV optical isolation (input, output, power)Wide operating temperature: -40 to +85 °CModbus ASCII/RTURugged IP30 metal panel mount case, DB9 F / TB10-48 Vdc input power (external power supply required, sold separately)UL C1/D2, IEEE-61850-3, IEEE-1613
-
Product
Industrial Shock Absorbers
-
ACE industrial shock absorbers work hard. Their application means moving loads are evenly decelerated over the full stroke. The result: the lowest braking force and shortest braking time. The MAGNUM series from ACE is viewed as the reference standard for medium-sized damping technology.
-
Product
Industrial AC Power Supply PS2 Form Factor, 350W
APS-935XA-EPS12
Power Supply
- Power (typical): 350W- Current Type: EPS12- AC Voltage Input Range: 110 - 220 VAC (±10%)
-
Product
Industrial Motherboards
Motherboard
Advantech industrial motherboard series, ranging from UTX motherboards, Mini-ITX motherboard and Micro ATX motherboard are ideal for customers who are used to using commercial off-the-shelf products but require expansion and industrial features such as longevity and reliability.
-
Product
Squid Carrier Board™ Family PCI Express Gen 3 Carrier Board for 6 MiniPCI Express Modules
SKU-085-31
-
PCI Express Carrier board for 6 MiniPCI Express modules was designed to expand modern motherboards with PCI Express interface. It is the first carrier board in the Squid family with MiniPCI Express 2.1 and PCI Express Gen 3 Specifications support.
-
Product
Carrier - Virtex 7 W/FMC Site
VPF: 3U VPX
-
The VPF is a VPX form factor (VITA 46), FPGA processor board designed to meet the needs of challenging, embedded high‐performance digital signal processing applications at a competitive price point. AMD Virtex 7: VX330 and VX690 population options are available. The Virtex 7 FPGA provides impressive processing capabilities and supports operations such as: FFTs, FIR filters, fixed‐point and repetitive processing tasks. The VPF FPGA node processes input from the FMC HPC (Vita 57.1) site, allowing for maximum application configurability and performance when coupled with DEG’s market leading ADC and DAC FMC modules (250MSPS to 4.0GSPS). The VPF is fully compliant with the OpenVPX standard and accommodates the PCIExpress Gen 3.0 communication protocol. Delphi also offers a VPF FPGA Design kit which allows customers to leverage and modify DEG source code, develop within an open architecture, and rapidly integrate FPGA HDL. The DEG FPGA Design kit includes: Source code, simulation test bench and utilities to support custom algorithm development. Embedded Linux, VX Works and Windows software drivers are available. HPC FMC Site, Fully Compatible with all Delphi ADC and DAC FMC Modules.
-
Product
8GE Port Gigabit Unmanaged Industrial PoE Ethernet Switch
EKI-2708G-PI
-
8 x Gigabit Ethernet ports, Support 8 x IEEE 802.3at/af PoE ports for PD demands, Up to 30W output per PoE port. Supports jumbo frame transmission up to 9k bytes, 12 ~ 48 VDC redundant dual power input and 1 relay output, Wide operating temperature range of -40 ~ 75°C, Supports EMC Level 4 protection for extreme outdoor environments.
-
Product
Industrial Unmanaged Ethernet Switches
EKI-2000 Series
-
Advantech's EKI-2000 Series are the best deal offer for your Ethernet connections. Their super-slim IP30 metal casing design provides high reliability to quickly deliver continuous data transmission with high degree of security, making them an ideal option for your Ethernet solution.
-
Product
55" UHD Industrial Digital Signage Monitor & Touch
DSD-3055
-
Superior Resolution UHD (3860 x 2160) Contrast 4000 :1, Ultra-Wide Viewing Angle (178°) Response time : 6.5ms. Power consumption 145 W, Life time 50,000 hrs, Fanless design.
-
Product
Omni-Directional Radiation Pattern, Compatible For WiFi5/6/6E/7,industrial Grade Temperature Range, IP67 Level
AIW-513
-
Dipole antenna with omni-directional radiation patternSupport 6GHz bandCompatible for WiFi5/6/6E/7RP-SMA male connectorOperating Temperature: -40 ~ 85℃IP67 level
-
Product
Enhanced Serial Interface Module for Excalibur 8000 Family of Carrier Boards, with High Baud Rate & High Throughput
M8KSerial
Serial Interface
The M8KSerial is an enhanced serial interface module for the multiprotocol Excalibur 8000 family of carrier boards, that includes several advanced features such as a high baud rate and high throughput. This module supports up to two independent channels of serial communications, each of which can be selected as RS-485, RS-422 or RS-232. The module operates independently of the host computer, reducing the need for host intervention.The M8KSerial module is based on the Exar XR16M570 Universal Asynchronous Receiver/Transmitter (UART). The device is compatible to industry standard 16550 UARTs. Each of the M4KSerialPlus’s four channels contains a transmit FIFO capable of holding up to 16384 bytes and a receive FIFO capable of holding either 16384 receive bytes or 5460 bytes with a 32-bit Time Tag associated with each byte. These large buffers allow application code to transfer large quantities of data with a single non-blocking subroutine call. The 32-bit Time Tag on receive channels is very useful for synchronizing serial data with data from other modules on the 8000 board or on other interface boards. Each channel has a programmable baud rate of up to 10 Mbps and can be configured as RS-232, RS-422 or RS-485.The M8KSerial module is supplied with C drivers, including source code.
-
Product
Industrial Gateway
AFE-E630
-
Advantech AFE-E630 is an industrial gateway powered by the Rockchip RK3568J, designed for I&C ESS energy storage management.
-
Product
Industrial Tester
-
Ensures products, materials, or systems meet quality, safety, and performance standards by performing tests like voltage checks, mechanical stress tests, or functional simulations, using specialized equipment or manual methods to identify defects and ensure reliability in manufacturing, construction, and technology sectors, often for electrical, data, or material integrity.
-
Product
Industrial AI Camera
CAM-5330-U
-
3D Stereo USB3 camera with RGB 2MP rolling shutter and depth 1MP global shutter. Baseline: 50mm. Depth range: 0.1m~20m+. Works indoors/outdoors.
-
Product
Industrial 4 Gas Combustion Analyzer
K905
-
UEi Test & Measurement Instruments
Hand-held indusrial Combustion analyzer with Wireles communication option
-
Product
Industrial 4TX/1SFP Light Managed PoE BT Media Converter
IMC-595MPI
-
Versatile 5-port, total 180W power output media converter at extended temperatureSupports Switch/Injector mode setting by SNMP/iViewSupports SNMP/iView for remote managementDip switch for LFPT and Power Force modeSupports LLDPSupports Jumbo Frames up to 9,216 bytesSupports Modbus/TCPSupports Broadcast Storm Control ON/OFF
-
Product
Carriers & Adapters
-
Carriers and adapters enable the use of PMCs or XMCs in a PCI based system. Designed to improve your system with additional I/Os. Key control signals on PCI fixed to ground to reduce signal undershoot. Carrier and adapter allowing you customization of your system platform with additional I/O mezzanine boards for your application needs. A 5 V to 3.3 V linear regulator provided. Carriers and adapters are available for different topologies like CompactPCI, CompactPCI Serial, OpenVPX, VME or VME64x.
-
Product
Dual PMC Carrier for 6U CompactPCI
TCP262
-
The TCP262 supports standard PMC front I/O and CompactPCI rear I/O fully compatible to the TCP260. The PMC slot 2 (upper PMC) I/O lines are connected directly to the CompactPCI connector J5. The PMC slot 1 (lower PMC) I/O lines are connected directly to the CompactPCI connector J3.
