9025 Slide Mount
Virginia Panel Corporation (VPC)
The 9025 Slide Mount was developed to provide maximum versatility and easy access to instrument-side wiring and cable assemblies. Ordering is simple: the 9025 Slide Mount s is offered as a package that includes the receiver, flanges and instrument bracket. The only to determine is the type of slide kit needed. VPC offers a selection of slide kits designed to fit most common rack depths. Slides are rated to support 180 lbs (81 kg) to accommodate large fixtures.
-
Product
Receiver, 9025, 25 Module, for Slide Mounting
310104437
Receiver
The 9025 is a 25 module receiver designed to fit into a standard 19" rack. It is equipped with a locking handle to ensure proper ITA engagement. An included integrated microswitch shuts off power when the ITA disengages from the receiver. This receiver is designed to work with a slide kit, includes mounting flanges and an instrument bracket. A slide kit is required, but not included.
-
Product
Receiver, 9025, 25 Module, Slide Mount, Telescopic Handle - Right Side
310104477
Receiver
The 9025 is a 25 module receiver designed to fit into a standard 19" rack. This model is equipped with a telescopic handle on the right side. This handle is designed to rest flush against the side of the receiver as a standard handle, or can be extended out to the right up to 3" to accommodate a larger ITA enclosure or other obstruction that may prevent normal handle operation/ engagement.As with the standard 9025, a microswitch is included. Mounting flanges and an instrument bracket are also included for slide mounting. A slide kit is required, but not included. See 9025 procedure sheet/ user manual for instructions on choosing the correct slide kit length for your test rack. *Please note: Consult procedure sheet/user manual for information regarding slight slide mechanism bracket protrusion downward into next U height on test rack on both sides of receiver.
-
Product
Receiver, 9025, 25 Module, Slide Mount, Telescopic Handle - Left Side
310104498
Receiver
The 9025 is a 25 module receiver designed to fit into a standard 19" rack. This model is equipped with a telescopic handle on the left side. This handle is designed to rest flush against the side of the receiver as a standard handle, or can be extended out to the left up to 3" to accommodate a larger ITA enclosure or other obstruction that may prevent normal handle operation/ engagement.As with the standard 9025, a microswitch is included. Mounting flanges and an instrument bracket are also included for slide mounting. A slide kit is required, but not included. See 9025 procedure sheet/ user manual for instructions on choosing the correct slide kit length for your test rack. *Please note: Consult procedure sheet/user manual for information regarding slight slide mechanism bracket protrusion downward into next U height on test rack on both sides of receiver.
Filter Products:
Slide Kit
-
Product
20" Slide Kit, Fits 20"-22" Deep Racks, Supports 180 lbs
310113409
Slide Kit
20" Slide Kit, Fits 20"-22" Deep Racks, Supports 180 lbs.Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.
-
Product
24" Slide Kit, Fits 24"-26" Deep Racks, Supports 180 lbs
310113410
Slide Kit
24" Slide Kit, Fits 24"-26" Deep Racks,Supports 180 lbs.Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.
-
Product
30" Slide Kit, Fits 30"-32" Deep Racks, Supports 180 lbs
310113411
Slide Kit
30" Slide Kit, Fits 30"-32" Deep Racks, Supports 180 lbs.Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.
-
Product
28" Slide Kit, Fits 28"-30" Deep Racks, Supports 180 lbs
310113451
Slide Kit
28" Slide Kit, Fits 28"-30" Deep Racks, Supports 180 lbs.Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.
-
Product
36" Slide Kit, Fits 36"-38" Deep Racks, Supports 180 lbs
310113500
Slide Kit
36" Slide Kit, Fits 36"-38" Deep Racks, Supports 180 lbs.Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.
Protective Cover
-
Product
Protective Cover, 9025, 9025VXI & 9025TR, Receiver
310113163
Protective Cover
The Receiver Protective Cover is optional to protect your modules and contacts when the ITA is not engaged. The Protective Cover is made up of anodized aluminum.
-
Product
Protective Cover, 9025, 9025VXI & 9025TR, ITA
410112578
Protective Cover
The ITA Protective cover is made up of aluminum making it more durable and shock resistant to protect your contacts and modules when the ITA is not in use.
Instrument Bracket
-
Product
Instrument Bracket Kit, w/ Strain Relief, Slide Configuration, for 28"+ Slide Kits
310113002
Instrument Bracket
Instrument Bracket Kit, w/ Strain Relief, Slide Configuration, for 28"+ Slide Kits Similar to instrument bracket p/n 310113453, but includes cutout to accommodate air intake on NI PXIe-1088 chassis. Only compatible with slide configurations 28" and longer. Not compatible with cable tray. Not recommended for use with 2+ tier 90 Series systems (905, 9075, etc.).Used to mount testing instrument to slides and also allows test instrument to slide out for maintenance access. Provides strain relief in front area of bracket. Compatible with chassis (see drawing for more information)
ITA
-
Product
ITA, 9025, 25 Module, Single Tier
410104111
ITA
Supports a maximum load of 787 lbs to achieve .030" total deflection.
Mounting Kit
-
Product
Mounting Block Kit, Instrument Bracket, Use with Various Test Chassis
310113542
Mounting Kit
Instrument brackets come with pre-drilled holes that can be used to mount different instrument chassis (from multiple vendors) to the bracket. In order to use these mounting holes with Pickering Chassis, this mounting block kit must be used.
Enclosure
-
Product
Enclosure, 9025, Hinged Cover, 4" Depth
410112198
Enclosure
Enclosure, 9025, Hinged Cover, 4" DepthHousing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Enclosure, 9025, Hinged Cover, 8" Depth
410112273
Enclosure
Enclosure, 9025, Hinged Cover, 8" DepthHousing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
Product
Enclosure, 50 Module, 50 Module 4" Adapter for 25 Module, Hinged Cover
410112336
Enclosure
This 50 Module Enclosure is made of aluminum, and the top of the enclosure is a hinged cover plate with ¼ turn hardware that provides easy access to the ITA’s wiring when required. It also includes an adapter plate part to mount the enclosure to a 25 Module ITA.
Receiver
-
Product
Receiver, 9025, 25 Module, for Slide Mounting
310104437
Receiver
The 9025 is a 25 module receiver designed to fit into a standard 19" rack. It is equipped with a locking handle to ensure proper ITA engagement. An included integrated microswitch shuts off power when the ITA disengages from the receiver. This receiver is designed to work with a slide kit, includes mounting flanges and an instrument bracket. A slide kit is required, but not included.
